Page 4 - catalogo Tillett

B6 / B6XL

The B6 is a narrow lightweight seat suited to many kit and track day cars and has
the same inner shape as the FIA B6 Screamer. The B6 has bottom mounts as
standard and uses a lighter construction than the Screamer version. Therefore,
this model is not FIA homologated. The headrest area and belt holes have been
made to suit the requirements of a Hans device. The B6 is available in
carbon/GRP and black GRP versions and they come as standard with a suede
padded headrest. To reduce vibration, it also has the option of Dinamica®
covered suede panels.
The composite of the B6 is made so that the outer edge can either be removed
for a narrow 40 cm cockpit areas (B6-40). Or it can be left on to create a
42cm External continuous rolled edge around the whole perimeter of the seat. This “edges on”
XL 45cm version is designated the B6-44. With the mounting points for the B6 being under
the seat as standard, the TR1 Tillett adjustment runners can be bolted directly
37cm Internal underneath using the TK5 fitting kit. Also, by using at least 40 mm of spacers
XL 41cm under each M8 mounting point, the B6 can be bolted directly to the floor without
runners. The Tillett 50 mm diameter x 5 mm and 10 mm thick Nylon spacers can
be used for this purpose and they enable a small adjustment of angle. As a no
cost option, the B6 can be ordered with side mounts. When fitted with the “side
mount” option the seat can use all the bracket sets made for the Screamer.
Please specify “bottom” or “side mounts” when ordering. The weight of a B6 is
34cm Internal very light at 4.2 kg or 5.2 kg with suede covered panels.
XL 37cm
B6 40cm or 44cm B6XL
with edge cut version The standard B6 is available in an XL size, which is 30mm wider. Unlike the new
XL 47cm and 43cm
B6 XL Screamer, the lighter B6 XL is not an FIA homologated model, but it is still
ultra-rigid. An externally narrower version is available named the B6-43 XL, with
the edges specially cut to reduce the outer width and allow a larger driver over
100 kg to sit in an ultra-narrow car. With the B6-47 XL the outer edge is left on,
creating a continuous rolled edge around the whole perimeter of the seat. The
mounting points for the B6 XL are on the underside of the seat as standard. With
bottom mountings, the TR1 Tillett adjustment runners can be attached
underneath the seat using the TK5 fitting kit. By using at least 40 mm of spacers
under each M8 mounting point, the B6 XL can be bolted directly to the floor
without runners. The Tillett 50 mm diameter x 5 mm and 10 mm thick Nylon
spacers can be used for this purpose and they enable some adjustment of angle.
As a no cost option, the B6 XL can also be ordered with side mounts. When fitted
with the “side mount” option the seat can use the same bracket types as the B6
35cm external across the base XL Screamer. Please specify either “bottom” or “side mounts” when ordering.
XL 38cm
The B6 XL is available in a Carbon or black GRP finish to the front surface and
comes complete with a suede padded headrest as standard. To give it that extra
B6-44 Carbon/GRP seat shown bit of comfort, the B6 XL has the option of Dinamica® covered suede padded
with optional side mounting points panels. The weight of a B6 XL is from 4.5 kg or 5.5 kg with suede covered panels.
Seat specifications available
100cm B6-40 / B6-44 Carbon GRP
100cm
B6-40 / B6-44 Carbon GRP with Dinamica® suede panels
B6-40 / B6-44 Black GRP
81cm B6-40 / B6-44 Black GRP with Dinamica® suede panels
B6-43 XL / B6-47 XL Carbon GRP
The 3.5cm dimension refers to B6-43 XL / B6-47 XL Carbon GRP with Dinamica® suede panels
52cm
the bottom of the seat dome to 52cm B6-43 XL / B6-47 XL Black GRP
mounting plane. B6-43 XL / B6-47 XL Black GRP with Dinamica® suede panels
60 o o (All weights quoted are + or – 10%)
60
10cmm 3.5cm 25cm25cm (Please note that Caterham branded seats are
only available through Caterham Cars Ltd.)
69.5cm
www.tillett.co.uk